The wax filler formulated for repairs of cracks, scratches and defects on the floating floors, parquet, stained wood and polished furniture. The filler is light-stable after application. The following treatment of repaired places by the common way. Very quick and easy reparation. Use for interior and exterior.
An all-purpose putty for window glass glazing to wooden and metal window frames. The glazing putty is very easy to apply. We offer it in two shades and various packings. After curing overcoatable with all types of usual coatings.
Fast-drying nitro-based powder putty for wood. Special putty based on natural components that fills grooves, splints, joints in wood and wood chipboard, fills knag holes. For repairs indoors and outdoors, for sizes 1 mm – 5 cm. May be ground and painted.
A special, extra fine, acrylic wood filler is formulated for repairs of cracks, scratches and defects in wood, chipboards and wood fibre boards. Usable for interior and exterior applications. Apply the filler in layers from 0.5mm to 4 mm. At outdoor applications always overpaint. Sandable and overcoatable.
Filler containing wood powder for sealing wood and wooden objects. Flexible and does not shrink, crack or cave in. Easy to sand and can be tinted both before applying and after drying. Structurally very similar to natural wood. Suitable surfaces: wood, chipboard, planks, wooden objects.
This ready to use, sandable compound is a single component joint filler formulated for jointing plasterboard joints, filling gaps and final smoothing fillets between plasterboard. Suitable for interior use. If become dry there is a possibility to smooth the surface with a wet sponge and finish smoothing without dust or after curing (2-6 hours according to thick of layer) can be sanded.
A special, easy to use, fill-in filler for patching your walls and ceilings before their decorating that masters repairings, unevennesses and cracks from 1mm – 50mm in one layer. Also it is suitable for fixing, moulding and shaping. It is full substitution for the traditional plaster used by electricians and owing to 45-minute workability it offers plenty of time to finish all repairs.
A special, plaster-based, dry blended, filling and fixing filler for indoor installation works and moulding. The plaster filler Profi masters repairings, unevennesses and cracks from 1mm – 50mm in one layer. It is full substitution for the traditional plaster used by electricians and owing to 20-minute workability it offers plenty of time to finish all repairs.
Every packing contains filling knife and a pot free of charge to stirring up and simple application of the filler.
A latex filler formulated for all-area repairs on masonry, wood and concrete. The surfaces to be treated must be free of all contamination, grease and dust. The layer 2mm – 5mm is dried thoroughly after 3 – 8 hours depending upon drying condition especially ambient temperature. It is suitable for indoor and outdoor use (in the case of exterior use should be overpainted). If become dry there is a possibility to smooth the surface by a wet sponge. After curing the filler can be sanded.
A special, superlight filler for repairs of large cavities and outer corners in interior and exterior. The suitable substrates are plasters, renders, plasterboards, masonry, wood, walls with final coating. It is overpaintable, no sagging, no cracking and shrinkage. It is sandable and can be easily smoothed. Good resistance against weather influences and very good adhesion to the substrate. Permanent. Apply from 1mm – 2cm in one layer.