Water-thinned modelling colours with bright surface and they are formulated for all types of cars, planes, boats models and all small things from wood, plastic, metal, glass, wall tiles, concrete etc. The colours have very good adhesion to the mentioned surfaces. The range Unikolky offers 9 traditional shades and we added to the basic range dull polish paint for finishing of your model or thing on the velvet dull polish surface. All shades are possible to mix.
A light/heat reflective and decorative coating to extend the life of roofing materials (sheet metal, bitumen felt and other sheathing felts) wood and some plastics. It reduces the solar heat build up therefore reducing thermal movements and protects surfaces from UV degradation.
A paint intended for interior and exterior top coat on wood and metal. The new coats, not dry fully, must not be exposed directly to weather influences. Before use mix paints thoroughly, if necessary strain them and apply with brush on clean, dry and degreased surfaces.
The product is not intended for coats in direct contact with food, animal feed, drinking water and for coats on children’s furniture and toys.
Silver coating is intended for coating of heatings, smoke-flues, heating bodies, exhausts and other things with maximal surface temperature 500°C. Lay on clean surface without rust, dust, fats and dirties. Lay on with a brush in continuous layers on warm surface +50°C. We advise to lay on in two thin layers, the best after 2 hours.
High temperature resistant paint. A paint developed for coating stoves, heating bodies, hot pipings, manifolds, exhausts, heat exchangers, boiler casings and others with the maximum surface temperature up to 500°C. The substrate have to be free of grease and rust. Apply the paint with brush or with spray in one or two layers. After 5 hours gradually heat up to achieve perfect paint burning off (minimum 15 minutes at 250°C).
Warning: Color shades in thumbnails may differ from real. Their intensity depends on the type and setting of the monitor and ambient light. We recommend visiting the nearest store with our products and checking the shade on the printed chart.
Interior and exterior matte-finish spirit stain for dying and treating natural wood.
Warning: Color shades in thumbnails may differ from real. Their intensity depends on the type and setting of the monitor and ambient light. We recommend visiting the nearest store with our products and checking the shade on the printed chart.
Aktivlak is a two-component interior and exterior epoxy varnish. Used for impregnating absorbent surfaces (concrete, wood, masonry etc.) under coating systems, for glossy, transparent coatings on wood, wood-fibre boards, plywood, parquets, floorboards, cork and metal. Chemical resistant, but not acid- or weather-resistant (UV radiation causes coat to turn yellow and chalky).
Aktivlak is a synthetic, quick-drying indoor and outdoor varnish with UV filter. Used for coating wood and metal, particularly on boats (even parts that are permanently submerged in fresh water). Also suitable for pergolas, fences, wood furniture, outside doors, sporting equipment and objects exposed year-round to rain. Glossy, hard, damp-resistant finish. Recommended for coating metal parts on wooden objects.
Aktivlak is a one-component, interior and exterior epoxy varnish with UV filter. Used for coating wooden furniture, claddings, ceilings , cork, wood-fibre boards, and plywood, impregnating absorbent surfaces, and varnishing steel objects, wire, etc. Has a glossy, hard finish with good adhesive properties. Dry coat is resistant to weather, dampness, diluted chemicals and water with detergents. Recommended for coating metal parts on wooden objects.
Aktivlak is a synthetic, quick-drying, interior and exterior gloss paint with UV filter. Used for wooden cabins, windows, fences, pergolas and objects. High-gloss and hard finish. Dry coat is weather- and damp-resistant. UV filter prevents aging of paint. Also recommended for metal parts on wooden objects.
