A glass cloth woven fabric is used in connection with polyester resins (polyester resin LAMIT 109 or laminating kit LAMIT) to repairs of laminated parts (boat hulls, swimming pools, etc.). According to extent of repair and load lay on the repaired surface additional 2-3 well resin saturated glass cloth layers. After polyester curing it is sandable by usual means.
A glass cloth woven fabric is used in connection with polyester resins (polyester resin LAMIT 109 or laminating kit LAMIT) to repairs of laminated parts (boat hulls, swimming pools, etc.). According to extent of repair and load lay on the repaired surface additional 2-3 well resin saturated glass cloth layers. After polyester curing it is sandable by usual means.
A curing agent used for hardening two component 1200 epoxide resin and in Epoxy kit 1200.
Bonds metals, glass, ceramics, porcelain, wood, concrete, etc.. As far as the composition is repeatably washed after its curing with warm water and after that with 3% citric acid solution, conforms with conditions for the direct contact with food and drinking water. The composition must not be thinned by any thinner or solvent before application! Overcoatable.
For bonding epoxy compositions, epoxy screeds and filler preparation. Bonds metals, glass, ceramics, porcelain, wood, concrete, etc. As far as the composition is repeatably washed after its curing with warm water and after that with 3% citric acid solution, conforms with conditions for the direct contact with food and drinking water. The composition must not be thinned by any thinner or solvent before application! Overcoatable.
A catalyst for curing Lamit 109 polyester resin and in Lamit lamination kit.
A laminating kit developed for repairs of various laminated parts, e.g. boat hulls, swimming pools and garden ponds, sporting articles, body panels on vehicles, etc.
Laminating polyester preparation: To the required quantity of polyester add during permanent stirring 2% of catalyst. Prepare only such amount of resin that is workable during 15 minutes at temperature +20 °C. Never laminate at temperatures lower than +15 °C. Hardening lasts longer and repair quality decreases.
An all-purpose polyester resin formulated for laminating. Used for laminated parts repairs (boat hulls, swimming pools, etc.) an also for production of laminates based on continuous laminating, winding or injecting. Also for production of agglomerated natural stone slabs and structured stones.
