This ready to use, sandable compound is a single component joint filler formulated for jointing plasterboard joints, filling gaps and final smoothing fillets between plasterboard. Suitable for interior use. If become dry there is a possibility to smooth the surface with a wet sponge and finish smoothing without dust or after curing (2-6 hours according to thick of layer) can be sanded.
A special, easy to use, fill-in filler for patching your walls and ceilings before their decorating that masters repairings, unevennesses and cracks from 1mm – 50mm in one layer. Also it is suitable for fixing, moulding and shaping. It is full substitution for the traditional plaster used by electricians and owing to 45-minute workability it offers plenty of time to finish all repairs.
A special, plaster-based, dry blended, filling and fixing filler for indoor installation works and moulding. The plaster filler Profi masters repairings, unevennesses and cracks from 1mm – 50mm in one layer. It is full substitution for the traditional plaster used by electricians and owing to 20-minute workability it offers plenty of time to finish all repairs.
Every packing contains filling knife and a pot free of charge to stirring up and simple application of the filler.
A latex filler formulated for all-area repairs on masonry, wood and concrete. The surfaces to be treated must be free of all contamination, grease and dust. The layer 2mm – 5mm is dried thoroughly after 3 – 8 hours depending upon drying condition especially ambient temperature. It is suitable for indoor and outdoor use (in the case of exterior use should be overpainted). If become dry there is a possibility to smooth the surface by a wet sponge. After curing the filler can be sanded.
A special, superlight filler for repairs of large cavities and outer corners in interior and exterior. The suitable substrates are plasters, renders, plasterboards, masonry, wood, walls with final coating. It is overpaintable, no sagging, no cracking and shrinkage. It is sandable and can be easily smoothed. Good resistance against weather influences and very good adhesion to the substrate. Permanent. Apply from 1mm – 2cm in one layer.
A special, superlight filler for interior final coating and repairs of plastered walls and ceilings before painting. Easy to use without any after-marks! The filler is formulated for repairs of plastered walls and ceilings and also it masters smaller repairs of cracks, gaps and fallen away corners. At outdoor applications always overpaint. Overcoatable. Don´t sand. Filler´s texture is matching to the texture of plastered walls.
An all purpose, acrylic, creamlike, acrylic based filler suitable for small repairs on traditional masonry, plaster and wood. Apply the filler in layers from 1mm – 3mm. At outdoor applications always overpaint. Sandable and overcoatable.
An all purpose, paste-like filler for small repairs of masonry, plasterboards and wood in both interior and exterior. Apply the filler in layers from 1mm – 3mm. At outdoor applications always overpaint. Sandable and overcoatable.
An all purpose, paste-like, acrylic based filler for use on masonry, plasterboards, chipboards, wood, etc. in both interior and exterior. Apply the filler in layers from 1mm – 3mm. At outdoor applications always overpaint. Sandable and overcoatable.
